Air conditioners and heating units

Air conditioner requires yearly maintenance in order to maintain proper performance. Air conditioners and heating units consumes a large portion of monthly electricity bill. Proper maintenance of these units can bring a significant change in your monthly bill. Regular servicing of your air condition ensures that your unit is running efficiently, safely and most importantly, it will reduce your electricity cost. However, most of the people usually forgot to services their air-conditioning units. In order to enhance heating units efficiency and to cut the electricity cost it is very important to service the heating and air conditioning units. Certain health related issues might occur if you neglect air-conditioning and heating services, which are respiratory problems, asthma and carbon monoxide poisoning.

Generally, Installing a new equipment is more costly instead of repairing or refurbishment your existing equipment. Unit size needs to be taken into consideration while installing new equipment. If the unit size is too small, the system will be running for long hours. On the other hand, if you have a large system, it will not run long enough to keep up with the humidity. Furthermore, consideration includes single or multi stage air conditioners; single stage air conditioners run at full power and provide full comfort. A multistage air conditioner repair adjusts itself as needed to maintain the comfort level.

You are Air-conditioning and heating unit works hard to keep you comfortable. Even if you follow all the protection and necessary measures, you still need to refurbishment your existing equipment. If you notice that you are heating and air-conditioning system are not working efficiently and up to the standards you have to call the company for necessary refurbishment of existing equipment.

Refurbishment of existing equipment is an alternative to replace with a new one. Refurbishment of existing equipment is cost effective as compare to replacement of the equipment. Moreover, it is considered as a quicker option to minimize the downtime. In most of the cases, it is a more energy efficient solution because it saves the future energy costs.

In an air conditioner, there are pipe areas and electrical components, which can be refurbished. The pipeline area includes drain lines, indoor coil, outdoor coil, refrigerant meter device.  Electrical components involve capacitor, compressor, relay, gas valves, fuses, indoor and outdoor fan motor and furnace circuit board. Refurbishment and replacement of these components are necessary to run the system efficiently and effectively. As time passes the efficiency of electrical and pipe area is effected therefore it is required to refurbish the system.

A central air conditioning system is one of the most energy efficient and convenient ways to get rid from the hot humid summer weather. A centralized air conditioning system dehumidifies the air and pushes the air into the ducts, which supply the cold air in each room. These centralized systems are used in large buildings, shopping malls, hotels, airports and theaters. If whole building is required to be cooled, it is not viable to use split or window type AC. These small units do not have the capability to cool large places.

A central air conditioning system consists of two parts or split system that includes:

  • An outdoor unit that contains electrical components, compressor and condenser coil.
  • Series of pipes, which are connected with the inside and outside equipment.
  • Thermostat, which controls the desired temperature.
  • Ducts, which are served as air tunnel and placed at various places.

Best Pipes for Air Compressor

Have you been wondering what type of pipe should you use for your new air compressor? This can be slightly confusing and difficult to choose from the options you would be given since there are countless piping options. It is super important to have the correct pipe so you can get most of the work done within your limited budget. According to Alexander Gas & Plumbing, below is an explanation for which type fits best to your need.

1. Aluminum Pipe (Highly Recommended)

Come to think of it, in the past two decades, Aluminum Pipes have been proven the very best when it comes to clean air applications. Not only aluminum is non-corrosive, light and leakage free but it is also the easiest to install and no skills are required for the installation of this pipe.

2. Iron or Black Pipe

Like all the other pipes, this one too has its pros and cons. For pros, black pipes are strong, long lasting, easy to install and simply available at your local hardware store. Second best option for air compressors. However, it has it’s cons too. Since black pipes are not coated, they rust easily because of the moisture eventually and the installation takes more time than the aluminum ones.

3. Stainless Steel Pipes

Now, this type is almost the same as iron or black pipes. The only difference is that these do not rust but have a tendency to freeze causing trouble in general maintenance although steel pipes are equally strong and long-lasting.

4. Copper Pipes

These pipes are expensive but super handy. Since copper does not rust, the air is clean and it works great. Although the installation is quite difficult and needs special skills and experience.

5. PVC Pipes (Bad Choice)

For air compressors, try never buying a PVC pipe. It does not have any advantages other than being easily accessible. Since it’s plastic, PVC pipes are likely to crack, shatter or even break because of the air under pressure. These pipes are fatal and sharp, therefore, bad option.

Now that we have made it easier for you to choose the perfect pipe for your air compressor and you are running a little tight on budget, we can help you! No need to call the maintenance man. Here are some easy steps to set up your air compressor within no time!

Step #1:

Despite all the maintenance you can do around your house like a pro, setting up air compressors can be a little lethal, therefore, safety comes first hand. Use goggles, hard hat and boots, gloves and earplugs to avoid any accidental injuries. Also, do not use an extension lead. Make sure you are using a direct plug-in.

Step #2:

Use the manufacturer’s manual to check which oil should you use and check the level through a sight glass up to a red line. Next up, attach the air filter to the side of your air compressor.

Step #3:

Now you have to insert the oil plug and then plug the air compressor into the nearest outlet safely. Now turn the power on.

Step #4:

The air compressor tank starts filling up once you turn it on. Your air compressor may shut down once you use the air compressor tools however it will restart when you stop. Now connect the air hose and wrap the base with a tape to avoid the air from slipping out. Connect the air tool or simply use the attached connector.

Step #5:

Now use the manual to set the regulator. Once you are done, close the valve and turn the power off. Now unplug the air compressor so it does not overheat in your absence. Drain the tank through the bleed valve of your air compressor and make sure to renew the oil after a couple uses to keep your motor fresh. Keep the compressor in a moderate temperature so prevent explosions and moisture fogging up.